2016 Dodge Dart Headlight Bulb: A Guide To Replacement

For 20132016 Dodge Dart LED Black Projector Headlights Headlamps w from www.ebay.com

If you're driving a 2016 Dodge Dart, it's important to keep your headlights in good working condition. Not only do they help you see the road ahead, but they also help other drivers see you. Over time, your headlights may start to dim or burn out completely. When this happens, you'll need to replace the bulbs. In this guide, we'll walk you through the process of replacing the headlight bulbs on your 2016 Dodge Dart.

Step 1: Gather Your Tools and Supplies

Before you start, you'll need a few things. You'll need a replacement headlight bulb, which you can purchase at your local auto parts store or online. You'll also need a socket wrench with a 10mm socket, a flathead screwdriver, and a pair of gloves. It's important to wear gloves when handling the bulb, as the oils from your skin can damage it.

Step 2: Remove the Headlight Assembly

To access the headlight bulb, you'll need to remove the headlight assembly. Start by opening the hood and locating the two bolts on top of the assembly. Use your socket wrench to remove these bolts. Next, use your flathead screwdriver to pry the assembly away from the car. Be gentle, as the assembly is still connected by wires.

Step 3: Replace the Headlight Bulb

Once you have the headlight assembly removed, locate the back of the assembly where the headlight bulb is housed. There will be a small wire clip holding the bulb in place. Use your screwdriver to gently pry the clip off of the bulb. Then, carefully remove the bulb from the socket by gently pulling it out. Take your new headlight bulb and insert it into the socket. Make sure it's securely in place. Then, reattach the wire clip to hold the bulb in place.

Step 4: Reattach the Headlight Assembly

With the new bulb in place, it's time to reattach the headlight assembly. Start by lining up the assembly with the holes where the bolts go. Then, use your socket wrench to tighten the bolts back into place. Make sure the assembly is secure and snug against the car.

Step 5: Test Your Headlights

Finally, test your headlights to make sure they're working properly. Turn your car on and switch your headlights on. Make sure both headlights are working and that they're aimed correctly. If everything looks good, you're done! Replacing the headlight bulb on your 2016 Dodge Dart is a simple process that can be done at home with just a few tools. By following these steps, you can keep your headlights working properly and ensure your safety on the road. Remember to always wear gloves when handling the bulb, and be gentle when removing and replacing the assembly. With a little bit of effort, you can have your headlights shining brightly once again.