How To Put Your Jeep In 4 Wheel Drive


1948 Willys Jeep 4Wheel Drive Pickup The Elkhart Collection RM
1948 Willys Jeep 4Wheel Drive Pickup The Elkhart Collection RM from rmsothebys.com

Jeeps are known for their off-road capabilities, and one of the features that make them great is their four-wheel drive system. However, if you're new to the Jeep world, you may be wondering how to use this feature. In this article, we'll go over how to put your Jeep in 4 wheel drive, step-by-step.

Step 1: Understand Your Jeep's 4WD System

Before we dive into how to put your Jeep in 4 wheel drive, it's important to understand the different types of 4WD systems that Jeeps have. The most common systems are part-time 4WD and full-time 4WD.

Part-Time 4WD

Part-time 4WD is typically found in older Jeeps and is designed for off-road use. It's not meant to be used on dry pavement, as it can cause damage to your Jeep. In part-time 4WD, power is split evenly between the front and rear axles.

Full-Time 4WD

Full-time 4WD is found on newer Jeeps and is designed for both on and off-road use. It can be used on dry pavement without causing damage to your Jeep. In full-time 4WD, power is constantly being sent to all four wheels, and it can adjust to different driving conditions automatically.

Step 2: Locate the 4WD Selector

The next step in putting your Jeep in 4 wheel drive is locating the 4WD selector. The location of the selector will vary depending on the model of your Jeep. However, it's typically located on the center console or on the dashboard. Consult your owner's manual if you're unsure where the selector is located.

Step 3: Shift into 4WD

Now that you've located the 4WD selector, it's time to shift into 4WD. Here's how to do it:

Part-Time 4WD

If your Jeep has part-time 4WD, follow these steps:

  1. Stop your Jeep.
  2. Shift your Jeep into neutral.
  3. Select 4WD by moving the selector into the 4H position for high range 4WD or the 4L position for low range 4WD.
  4. Shift your Jeep into drive.

Full-Time 4WD

If your Jeep has full-time 4WD, follow these steps:

  1. Stop your Jeep.
  2. Select 4WD by moving the selector into the 4H position for high range 4WD or the 4L position for low range 4WD.
  3. Shift your Jeep into drive.

Step 4: Test Your 4WD

After you've shifted into 4WD, it's important to test it out to ensure everything is working properly. Here are a few things to keep in mind:

  • Don't exceed speeds of 55 mph in 4H and 25 mph in 4L.
  • Don't make sharp turns while in 4WD.
  • Don't use 4WD on dry pavement unless you have a full-time 4WD system.

Conclusion

Putting your Jeep in 4 wheel drive is essential if you plan on taking it off-road. By following the steps outlined in this article, you can easily shift into 4WD and enjoy all the capabilities that your Jeep has to offer. Just remember to always test your 4WD and use it responsibly to ensure the longevity of your Jeep.


Komentar

Posting Komentar