Are you tired of your rear windshield wiper running continuously, even when it's not raining? Or maybe it's stuck in the middle of the windshield and won't turn off? Either way, we've got you covered. In this article, we'll teach you how to turn off your rear windshield wiper and troubleshoot any issues that may be causing it to malfunction. So sit back, relax, and let's get started.
Step 1: Check the Wiper Controls
The first step in turning off your rear windshield wiper is to check the wiper controls. Most cars have a wiper stalk on the right side of the steering column that controls both the front and rear wipers. Make sure the stalk is in the off position and not stuck in the on or intermittent position.
If your car has a separate control for the rear wiper, check to see if it's turned off. It's usually located on the dashboard or center console, near the front wiper controls. If it's on, turn it off and see if that resolves the issue.
Step 2: Check the Wiper Motor
If the wiper controls are in the off position and the rear wiper is still running, the next step is to check the wiper motor. The wiper motor is located under the rear hatch or trunk and is responsible for moving the wiper arm back and forth.
To check the wiper motor, first, turn off the car and remove the key from the ignition. Then, locate the fuse box and check the fuse for the rear wiper. If the fuse is blown, replace it with a new one and see if that resolves the issue. If the fuse is fine, it's time to check the wiper motor itself.
Step 2.1: Remove the Wiper Arm
To access the wiper motor, you'll need to remove the wiper arm. First, lift the wiper arm away from the windshield and locate the small tab on the underside of the arm. Use a small screwdriver to pry the tab up, then pull the arm off the motor shaft.
Step 2.2: Test the Wiper Motor
With the wiper arm removed, turn the car back on and turn on the rear wiper controls. Listen for any sounds coming from the wiper motor. If you hear a humming or grinding noise, the motor is likely working but the wiper arm is stuck or the linkage is broken.
If there's no sound coming from the motor, it may be faulty and need to be replaced. You can test this by using a multimeter to check the voltage at the motor's electrical connector. If there's voltage but no movement, the motor is likely faulty.
Step 3: Check the Wiper Arm and Linkage
If the wiper motor is working but the wiper arm isn't moving or is stuck in the middle of the windshield, the issue may be with the wiper arm or linkage. The wiper arm is the metal rod that connects the motor to the wiper blade and moves it back and forth.
The linkage is the mechanism that connects the wiper arm to the motor and moves it in a smooth, even motion. If the linkage is broken or disconnected, the wiper arm won't move properly.
To check the wiper arm and linkage, first, remove the wiper arm as described in Step 2.1. Then, inspect the arm and linkage for any signs of damage or wear. If the arm or linkage is broken, it will need to be replaced.
Conclusion
In conclusion, turning off your rear windshield wiper is a simple process that can be done by checking the wiper controls and the wiper motor. If the issue persists, it's likely a problem with the wiper arm or linkage, which may require replacement. By following the steps outlined in this article, you can troubleshoot and fix any issues with your rear windshield wiper and keep it running smoothly.
Komentar
Posting Komentar